Parts & Accessories
$40.00
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy.
- Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers.
- No tangled wires on your bike to connect the sensor to your device.
- The RPM speed installs easily with no magnets required
- It only weighs 16.5 grams with the mount included
- Provides accurate speed data during your ride
- Mounts on most front wheel hub with a secure silicone casing
- Two LED lights show the sensor's device connection (blue) and speed detection (red)
- No charging required! Operates on a coin cell battery for up to 1 years.
- RPM Speed will fit with most bikes and frame sizes
$167.00
- Di2 internal battery, fits all e-Tube Di2 groups
- Capacity: 500 mAH (± 2000km)
- Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets
- Requires SM-BCR2 charger
$118.00
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want.
- Limitless remote shifting positions for drop and aero bars
- Wired shift buttons can be positioned however the rider prefers
- Connect to Blip Box or drop bar eTap levers
- Compatible with SRAM RED eTap shift/brake controls
$49.00
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete.
- Finish: Black
- Compatibility: SRAM RED eTap
$82.00
Spare hose kit for Quarq's ShockWiz automated suspension tuning device.
- Contains one of each hose type and four zip ties.
$8.00
The Under Stem Mount allows riders to secure a Shimano Di2 Junction Box to their bike quickly and easily without the need for zip ties, duct tape, or other unreliable attachments.
- Lightweight alloy headset spacer with nylon body (9g)
- Compatible only with Shimano Di2 Junction Box
- 95mm length, 44mm width, 6mm height
- 6 Degree angle
$5.00
The MSW Computer Spoke Magnet is designed to fit round and bladed spokes of various diameters.
- Tool-free installation
- Alloy construction
- Fits round and bladed spokes
$45.00
The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system.
The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem.
Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.
$70.00
The strongest K-EDGE Mount yet, designed for today’s heaviest computers, cameras and lights. Upgrade to the Garmin Max Combo mount for a solid and clean platform for your cycling electronics. Chosen by the best, year after year, when quality, performance and craftsmanship matter.
- Max XL combo mount is compatible with all Garmin Cycling Computers
- Combo Mount (Computer on top – light or camera underneath) with GoPro style light/camera interface
- GARMIN approved replaceable computer insert protects computer tabs
- CNC Machined Aluminum, Anodized Black with laser etched logos
- Made in-house, Boise, Idaho USA with a Lifetime Warranty
- Weight: 63g
$30.00
The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820).
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface
- Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.)
- Made in Boise, Idaho, USA.
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
$7.00
Replacement plastic insert kit for K-EDGE Wahoo Mounts.
The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break.
Attributes (specs):
– Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604)
– Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws
$75.00
The K-EDGE Garmin TT Mount is the most advanced Time Trial and Triathlon computer mount available. Featuring a twist-lock mechanism to lock your Garmin with confidence. The K-EDGE Garmin TT Mount’s aluminum design and its unique locking feature is by far the most advanced mount on the market. With traditional TT mounts for the Garmin computer, you have to either have enough room between the extensions to perform the ¼ turn “twist” or the computer has to be mounted above the extensions.
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface
- Compatibility – 22.2mm diameter TT Extensions
- Supported Computers – Garmin Edge 20, 25, 200, 500, 510, 520*, 800, 1000, and Forerunner 310XT
- Made in Boise, Idaho, USA
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
*Garmin 520 is not compatible at this time.
$40.00
Monitor your speed as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes.
The speed sensor 2 attaches to the hub of either wheel. You can set up wheel size in our Garmin Connect online community or self-calibrate with an Edge cycling computer or compatible Garmin device. Once set up, you’ll get accurate speed and distance at all times — even without a head unit.
ANT+ connectivity and BLUETOOTH Low Energy technology let you sync to Garmin Connect and other training apps, compatible devices and fitness equipment for better data when you ride indoors and outdoors.
$70.00
Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes.
The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit.
The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training.
Send live speed, distance and cadence data to compatible training apps or displays by using ANT+ connectivity and BLUETOOTH Low Energy technology.
With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros.
$40.00
Monitor your pedaling cadence as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes.
Simply attach the sensor and ride. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes.
$180.00
Extend your ride with the Garmin Charge power pack. This external battery pack plugs directly in to the Edge 1030 cycling computer, giving you up to 24 hours of additional battery life. It even fits into the new streamlined bike mount.
You can charge on the go by connecting the Garmin Charge power pack to any compatible fitness device with an additional cable — including wearables and other cycling computers. Just connect the power pack with a USB charging cable so you can stay in the action and get the most out of your activities.
- Bike mount sold separately or included with the purchase of Edge 1030
- Wearables with wrist-based heart rate that use a plug-based charger cannot be worn while charging
$10.00
Mount your Garmin Edge computer with the Quarter Turn Bike Mount. It includes the bike mount, rubber disc, and elastic bands to secure the Quarter Turn to your stem or handlebars.
$200.00
Stay aware of approaching cars with Varia RTL515 rearview radar. It pairs with your Edge bike computer or compatible smartphone to alert
you of vehicles approaching from behind up to 153 yards (140 meters) away. When used with your compatible smartphone, the Varia app uses
bold graphics — plus tone and vibration alerts — to indicate the position and speed of approaching vehicles.
MAXIMUM AWARENESS
- Varia RTL515 rearview radar provides visual and audible alerts for vehicles approaching from behind up to 153 yards (140 meters) away.
MULTIPLE PAIRING OPTIONS
- This radar works seamlessly with your Edge bike computer or compatible smartphone as well as select Garmin wearables or the optional radar display unit.
WORKS WITH THE VARIA APP
- This smartphone app helps you increase your awareness by providing graphics — plus tone and vibration alerts — that indicate the position and speed of approaching cars.
THIRD-PARTY APP COMPATIBLE
- When used with a compatible smartphone, Varia radar integrates with your favorite apps, such as Ride with GPS to overlay your maps with rearview radar alerts.
SUPERIOR VISIBILITY
- Alert motorists to your presence as soon as possible with daylight visibility up to 1 mile.
COMPACT DESIGN
- Easily mount this sleek, compact device on the seatpost of almost any road-use bicycle. The vertical design allows for better leg clearance and a perfectly comfortable ride.
PELOTON MODE
- Varia RTL515 features multiple modes, including peloton mode, which provides a low-intensity flash that is kind to other cyclists’ eyes when riding in a group.
BATTERY LIFE
- Time spent charging is not as good as time spent riding. Get up to 16 hours of battery life in day flash mode and up to 6 hours in solid mode.
Physical Specifications
- Dimensions: 3.9” x 0.8” x 1.6" (98.6 x 19.7 x 39.6 mm)
- Weight: 2.5 oz (71.0 g)
- Modes: solid, peloton, night flash, day flash
- Lumens: 20 solid, 8 peloton, 29 night flash, 65 day flash
- Battery life: 6 hours solid, 8 hours peloton, 6 hours night flash, 16 hours day flash
- ANT+: Yes
- BLE: Yes
- Water rating: IPX7
- Viewing angle: 220°
In the box:
- Varia RTL515
- Mounting Kit
- Cables
- Documentation
$20.00
Mount your Varia Rearview Radar or Varia Smart Bike Light (each sold separately) to the seat post of a second bike with this quarter-turn mount. Includes mount and 2 fitting shims.
$20.00
Mount your Varia Rearview Radar or Varia Smart Bike Light (each sold separately) to an aero or round seat post with this quarter-turn mount. Includes mount, 2 fitting shims and 4 O-rings.
$9.00
Get your computer dialed with the perfect magnet
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride.
- Universal crank magnets sized for your bike and sensor
- Compatible with all cadence sensors
$16.00
Where your gaze goes, your light follows
Add the safety of visibility to your helmet and light up the trail with help from the Bontrager Blaze helmet mount. Compatible with all Ion headlights.
- Quickly mount front light and camera accessories on the front of your Bontrager Blaze WaveCel helmet
- Tested with an accelerometer for intended breakaway point if involved in a crash
$8.00
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride.
Key features:
- Universal crank magnets work with any cadence sensor
- Get the perfectly sized magnet, sized right for your bike and sensor
- 20mm cadence magnet improves signal for wider gaps between crank and sensor
$75.00
Bontrager's DuoTrap Digital Speed/Cadence Sensor pulls double duty for your ANT+ cycling computer. It wirelessly transmits speed and cadence data and fits directly into the chainstay of certain Trek bicycles for a clean look that installs in seconds.
$75.00
Connect ANT+ and Bluetooth Smart devices to all of the data available from the DuoTrap S sensor for your on-the-bike wireless needs.
• ANT+ 2.4 GHz and Bluetooth Smart wireless digital speed and cadence sensor
• ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone
• For use with many ANT+ and Bluetooth Smart wireless technology enabled devices
• Includes Bontrager wheel magnet, crank cadence band, and CR2032 battery
• Works with Trek DuoTrap compatible bikes
$35.00
Key features:
- Replacement strap for Bontrager Heart Rate Belt
- Perfect option when the strap loses stretchiness or gets funky
- Not compatible with other heart rate monitors
Page 1 of 1