Cables
$70.00
Jagwire's Open End Caps are quality metal ferrules that put the finishing touch on your brake cable housing sections. They reinforce them so they stay straight and allow the cables and brakes to operate as smoothly as possible.
$68.00
The SlickWire Pro shift cable kit is a high-performance cable system that features a clear low-friction coated stainless cable, lubricated cable liner, liner seals, and compression-free housing. The result is a sealed cable shift system which greatly reduces shifting effort and protects the cables and liner from contamination, greatly increasing system longevity.
- Compatible with road and mountain shifters and derailleurs
$60.00
Open end caps have no o-ring or nylon ring.
- Step-down design mates 5mm housing with 4mm stops
- Material: chrome-plated steel
- 100-pack
$49.00
SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes.
- Compatible with SRAM Guide R, RS, RSC, and DB5 brakes
- Length: 2000mm
$49.00
Replacement line kit for SRAM and Avid hydraulic disc brakes.
- For Level Ultimate/Level TLM (A1), 2018+ CODE R/RSC (B1)
- 2000mm, black
$47.00
Hose kits for Hayes hydraulic disc brakes include stiff, durable hose and the necessary fittings.
$45.00
Jagwire's Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of shift cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in Gold and Silver so they also add a little style to your bike.
- Each Bottle contains 500 tips
$43.00
Precision-machined 4mm ID silver aluminum cable ferrules for improved shifting performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most shifting cables.
- Inside diameter: 4mm
- Outside diameter: 5.75mm
- Overall length: 12.7mm
- Material: aluminum
- Bottle of 50pcs
$35.00
Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.
$33.00
Many frames use internal cable routing for a tidy appearance and improved aerodynamics. In some cases, this can cause unwanted rattling sounds when riding over rough surfaces. Jagwire's Internal Housing Damper slides over brake and shift housing or hydraulic hose to reduce this noise.
- 10mm outside diameter
- Compatibility: 4.0-5.0mm brake housing, shift housing, and hydraulic hose
$18.50 - $23.00
Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.
$19.00
Rocket II direct cable adjusters fit into Shimano STI shifters with external shift cable routing.
- Rubber coated adjusting knobs for firm grip
- Adjustable on the fly
- 4mm
$19.00
SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.
$18.50
Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.
$16.49
Jagwire's Straddle Cables With Adjusters are for use on TRP Eurox and Paul Component Engineering cantilever brakes (brakes sold separately). The adjusters fit onto one brake arm and allow you to turn the rubber-coated ends of the adjusters to fine-tune your brake adjustment by tightening/loosening the Straddle Cables (included but not shown in the photo). You get 2 Straddle Cables and 2 Adjusters.
- Rubber-coated white adjusting barrel
- Compatible with TRP Eurox and Paul Component Engineering cantilever brakes
- Allows for adjustment of link wire/brake
- Includes two adjusters and two link wires
$15.00
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables.
- Slick cables are die-extruded for smooth operation
- Pre-stretched
- SRAM/Shimano mountain compatible cable end
- Stainless steel construction resists corrosion
- Single end cable features weld-cut for easy installation
$15.00
Get your cables under control.
- Trek cable stops and guides
- For specific compatibility concerns, please contact our Customer Service team
$14.00
Jagwire's Stick-On Cable Guides are made of lightweight aluminum with adhesive on the bottom. The aluminum lets them conform to any shaped frame tube and the adhesive holds fast. They come with Jagwire's C-Clips, nylon cable clips that snap onto the guides to hold the cables neatly in place. You get a pack of 4.
$13.00
Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
$11.00
Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.
$11.00
Protection where it's needed; Tube Tops can be placed virtually anywhere cable housing comes into contact with a bicycle frame. Designed to protect a frames finish Tube Tops can also be used to quiet cable slap.
$10.00
Jagwire's Frame-Mount Adjusting Barrels thread into the housing stops on most road frames and allow easy adjustment of cable tension for fine-tuning your shifting. They are made of aluminum for light weight and durability and have fluted, rubber-coated rings for easy turning by hand.
$10.00
SRAM's Inline Barrel Adjusters are placed on your brake cables near the handlebars so that you can turn the adjusters to fine-tune your braking. They feature durable and light aluminum/composite construction with rubber covers for easy operation.
$10.00
- Hydraulic Disc Brake Hose Fitting Kit
- Includes 5 threaded hosebarbs, 5 red comp fittings, 1 T8 Torx
- Compatible with Stealthamajig and standard levers
$10.00
Shimano Stainless Derailleur Cables
Cable Head: Shimano/SRAM
Cable Type: Stainless
Defined Color: Gray
Diameter: 1.2mm
Double Ended: No
Length: 3000 mm
Quantity Included: 1
$7.00
Rejuvenate the performance of your mountain or town brakes with this convenient and valuable cable.
- Rejuvenate the performance of your brakes with this convenient and valuable cable
- Extra-long 2750mm length ensures fitment for any application
- Compatible with most non-hydraulic mountain bike and city brake systems
- Stainless steel cable is rust-proof, comes pre-stretched, and includes cable end cap
- Diameter: 1.5mm
$7.00
Rejuvenate the performance of your road brakes with this convenient and valuable cable.
- Rejuvenate the performance of your brakes with this convenient and valuable cable
- Extra-long 2750mm length ensures fitment for any application
- Compatible with road brake systems
- Stainless steel cable is rust-proof, comes pre-stretched, and includes cable end cap
- Diameter: 1.5mm
$7.00
RockShox's Reverb Cable/Hose Line Guides are a great way to route dropper posts on frames without integrated guides. They secure with a zip tie, and feature a wide mouth that allows for cable articulation as you drop and raise your post.
Page 1 of 2
Next page