Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Brakes/Levers/Pads

SRAM Paceline Rotor
$43.00 - $54.00
Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance. - Designed for road use - Paceline brake track offers quiet brake operation
Shimano SLX BR-M7120 Disc Brake with Lever
$187.00
With a focus on reduced weight and cross-country tuned stopping power, Shimano SLX M7120 brakes provide intuitive modulation so that you can explore your limits with confidence. The BL-M7100 levers feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. At the caliper end, the BR-M7120 4-piston caliper is optimized for the toughest enduro trails. - 10% stiffer than previous generation M7000, even under high-temp conditions - Quicker brake engagement with shorter free stroke - Tool-free lever reach adjustment - I-SPEC EV Clamp Band enables optional integrated shifter setup - Includes finned metal pads
Avid FR-5 Single Brake Lever
$11.00
The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone
SRAM Centerline CenterLock Rotor
$53.00 - $59.00
The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: CenterLock - Rotor Type: Centerline
SRAM Level TL / Level T / Level / Level ULT / TLM B1 (2020+) / DB / Elixir Disc Brake Pads
$27.00
Original equipment pads for no-compromise disc brake performance. - Steel backed organic pad is quiet - Each pad kit includes two pads, a pad spreader spring, guide pin and clip - For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road
SRAM Centerline Rotor
$50.00 - $59.00
SRAM's Centerline Rotor delivers consistent, quiet and powerful braking. The rotor has a consistent center of friction throughout rotation to minimize vibration, so the only thing you'll notice about your brakes is how well they perform.
Shimano Deore SM-RT64 Disc Brake Rotor
$38.00
Shimano's SM-RT64 disc brake rotors deliver powerful and consistent braking performance in all riding conditions. SHimano's Center Lock mounting system makes installing and removing disc brake rotors quick and easy thanks to the spline mount and lock ring design. - Compatible with both resin and metal pads - Includes external type rotor lockring
SRAM Trail/Guide Disc Brake Pads
$27.00 - $33.00
SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.
Avid Road/Elixir/DB/Level B1 (2020+) Disc Brake Pads
$27.00 - $30.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid CPS Hardware Kit (Stainless Steel)
$14.00
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.
Hope E4 Brake Pads
$19.00 - $23.00
Replacement pads for Hope E4 hydraulic disc brakes.
Magura 7.P Disc Brake Pads
$31.00
- For long tours these pads offer safety together with excellent performance in all situations. - For MT disc brake 2 piston - 2 single brake pads, 2 pad retaining bolts
SRAM Level Disc Brake
$70.00
The SRAM Level brake levels the playing field with power and reliability stuffed into a lightweight package. This is no-nonsense performer, but don’t let its understated disposition fool you—Level gives you the art of braking in minimalist form.
Hope Moto Disc Brake Pads, Standard Compound
$30.00
Hope V2 Caliper Disc Brake Pads. · Fits Moto, Tech, and Tech Evo V2 Brakes · Standard Compound: softer compound than sintered; works better in dry conditions, but wears faster
Hayes Dominion A2 Disc Brake Pads
$39.00
Brake Pads for your Dominion A2 come in 2 flavors: Sintered T100 - Sintered metallic friction material provides maximum stopping power in wet and dry conditions. Semi-metallic T106 - Friction material provides enhanced modulation and silent operation.
Shimano XT BR-M8120 4-Piston Post-Mount Disc Brake Caliper
$125.00
Deore XT BR-M8100 hydraulic disc brake calipers offer powerful braking in a lightweight design. - 4-piston caliper is designed for tough enduro trails - High power braking instills greater downhill confidence and control - Banjo type connection and inside hose routing - Quick and easy assembly
Magura EBT screws
$13.00
Replacement EBT screws close the bleed port on Magura brakes. - Torque spec: 0.5 nM - T25 head - Sold as a pair
Shimano Deore V-Brake
$28.00
Shimano's Deore V-Brakes feature light lever feel and all-around stopping power. Light, stiff aluminum arms actuate grippy cartridge brake pads. Conical washers set up quickly and easily for optimal braking with low weight.
Avid Disc Brake Pads (Code)
$30.00 - $38.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Magura Olives
$22.00
Magura olives (compression ferrule) bag/20 - Small parts used to install hydraulic hose for Magura disc brakes. - Compatible with Campagnolo H11 brake/shift levers
Hope 160mm Rear 74mm to IS Disc Brake Adaptor
$20.00
· CNC machined in Barnoldswick, England · Includes mounting bolts · Not compatible with Hope Mono6 or Moto Brakes
Shimano XT SM-RT86 6-Bolt IceTech Disc Brake Rotor
$69.00
Shimano XT RT86 6-Bolt Disc Rotor - 3-layer structure with aluminum core and two stainless steel outer layers reduces rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors - Aluminum spider - Includes rotor fixing bolts and non-turn washers - Hub/Disc Compatibility: 6-Bolt Disc - Weight: 173 g - Rotor Size (mm): 203 mm - Rotor Type: Two Piece - Pad Compatibility: All Pad Compounds
Avid FR-5 Brake Levers
$21.00
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes
Avid Disc Brake Pads (Juicy/BB7/BB5)
$19.00 - $27.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Bontrager Carbon Stop Cork Brake Pads
$39.00
The Bontrager Carbon Stop Cork pad was engineered by Keith Bontrager specifically to work with carbon rims. Designed to dissipate heat on long descents and decrease rim wear, they will keep you coolly in control on even the most challenging mountain stages. Key features: - Engineered especially for use with carbon rims - Designed by Keith Bontrager for professional cyclists - Unique cork compound reduces braking heat and wear on rim
SRAM CenterLine 2-Piece Rotor
$77.00 - $84.00
SRAM's CenterLine rotors are light-weight, quiet, smooth and robust, featuring a two-piece design with an aluminum center and steel brake track.
Shimano Deore XT RT-MT800 Disc Brake Rotor
$56.00 - $68.00
Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design. - Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade - Quick and easy installation with spline mount and lock ring (included) - Compatible with metal and resin pads
Shimano Alivio BL-MT200/BR-MT201 Disc Brake and Lever
$49.00
Shimano Alivio hydraulic disc brake sets offer reliable and powerful braking, along with pre-bled hoses for convenient installation. - BL-MT200 hydraulic disc brake lever - BR-MT200 hydraulic disc brake caliper - Rotor sold separately
SRAM Road Disc Organic Brake Pads
$27.00
SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader
Avid BB7 MTN Cable Disc Brake Caliper
$62.00
The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with long cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No
Page 1 of 3 Next page